Millimeters to Pixels

• Measure in millimeters: Take the precise mm measurement for your layout element.
• Apply the conversion: px = mm × 300 ÷ 25.4.
• Use for print setup: Enter the pixel values in your print design software's document settings.

The calculator updates without reloading the page. Choose a preset density or type the DPI/PPI supplied by your design application, printer, or project specification. Copy the result when you are ready to use it elsewhere.

Millimeters to pixels at 300 DPI converts millimeters to pixels at print resolution. 1 mm = 11.81 pixels at 300 DPI. For precision work, millimeters provide finer granularity than centimeters. 1 mm = 0.0393701 inches, so at 300 DPI, 1 mm = 11.81 pixels. This converter is ideal for bleed margins (typically 3mm), trim marks, and precise layout positioning.

DPI and PPI are density inputs. PPI describes image pixels per inch, while DPI technically describes printer dots per inch. They are often entered as the same planning value, but they refer to different output systems.

Convert a 50 mm element to pixels at 300 DPI. 50 mm at 300 DPI = 591 pixels, useful for print layout positioning.

The example uses 300 DPI as an illustrative density. Changing the DPI/PPI field changes the pixel-to-physical-size relationship, so use the value required by your own project.

These lookup values use the example density of 300 DPI. Use the calculator for any other density rather than treating the table as universal.

A millimeter is 1/1000 of a meter, and there are 25.4 mm in one inch. In print design, millimeters are used for precise measurements like bleed (3mm), margins, and trim areas.

To convert mm to pixels: px = mm × DPI ÷ 25.4. At 300 DPI, the formula simplifies to px = mm × 11.811.

Common mm references in print: standard bleed = 3mm (35px at 300 DPI), safety margin = 5mm (59px), business card = 85×55mm (1,004×650px at 300 DPI).

• 3mm is the standard bleed: Most commercial printers require 3mm bleed on each edge. At 300 DPI, that's 35 pixels.
• Use mm for precision, cm for convenience: When accuracy matters (bleed, trim, registration), use mm. For general page sizing, cm is sufficient.

The calculation assumes that the measurement and DPI/PPI value refer to the same output workflow. It performs a mathematical conversion; it does not inspect an image file, detect a screen's density, change image resolution, or predict print quality.

Real printed or displayed size can differ because of application scaling, printer drivers, operating-system scaling, browser zoom, resampling, cropping, or device settings. Presets are illustrative and are not live device measurements.

• Inches to pixels calculator
• All conversion calculators
• Inches and pixels formula guide
• Pixels to inches

Conversions use exact unit relationships internally, preserve full numeric precision during calculation, and round only the displayed result. One inch equals exactly 25.4 millimeters, 2.54 centimeters, 72 typographic points, or 6 picas. Pixels require a DPI/PPI input because a pixel has no fixed physical length by itself.

Last reviewed: August 3, 2026. Read the conversion formula guide for the broader method.

Enter a non-negative millimeters value and a positive DPI/PPI value to calculate pixels. Keep the selected density with the copied result so the conversion can be reproduced later.